NEW! WeatherLink Console: The Smart Way to View Weather Data. Learn More
NEW! WeatherLink Console: The Smart Way to View Weather Data. Learn More
Skip to content

Power Boating

Unique and innovative Davis boating products improve boat performance, control trolling speed, prevent shock to lines and anchor chains at dock, and more.

Motors and Steering

The Original Hydrofoil

Doel-Fin Stabilizer Fin


Doel-Fin is the original hydrofoil developed by an aeronautical engineer to improve overall performance on boats with outboard motors or outdrive units. Molded in two pieces of guaranteed unbreakable, high-strength plastic, each foil is designed to flex independently to absorb shock. The positive effects include greater stability, consistent planing at lower RPM, faster out-of-the-hole performance, steadier turns, higher top-end speeds and lower bow rise at all speeds.

Learn more

Outboard Hoisting Harness

Motor Caddy


Motor Caddy securely attaches to outboards to provide a safe and secure handle for carrying, hoisting and lifting. Makes handling cumbersome motors safer, simpler. Sized to be quickly attached to most outboards from 2–15 horsepower. This unique design features a longer strap to fit 4-stroke motors and an added security strap for today’s streamlined engine cases. Made of UV resistant materials that will endure the marine environment for those who prefer a semi-permanent installation. Glass filled Nexus® nylon buckles insure easy installation and removal. May be installed with buckle on either side of the motor. The webbing is one continuous piece; pulling on one side will tension the other side. The self-centering handle serves as the lifting point for lanyards and hoists, or balanced lifting by hand.

Learn More

Fishing Accessories

Happy Troller Trolling Plates

A significant advancement in the sport of troll fishing, Happy Troller mounts on the anti-cavitation plate to allow fine control of trolling speed. Your boat’s stability is enhanced at cruising speed for a smoother ride in rough water, reduced porpoising and cavitation. Use it year-round in all boating activities— great for use in both salt and fresh water Made of highest quality stainless steel and marine aluminum, with clear anodized aluminum finish. Installs in 15 minutes with hardware included. Comes with full installation and operating instructions.

Shop Happy Troller Trolling Plates

Lil' Fella Trolling Plate - SKU 462


Little brother to the Happy Troller, Lil' Fella trolling plate is a fisherman's answer to correct trolling speed. Lil' Fella fits all outboard motors fits all outboard motors up to and including 25 HP. Locks "down" for trolling or "up" for cruising. Made of the highest quality polycarbonates with stainless steel hardware included. Comes with full installation and opperating instructions. 

Learn More

Fish Seeker

Trolling at 2 MPH with Fish Seeker, you can choose any trolling depth from 5 to 80 feet (1.5 to 25 m). Simply choose the right setting for desired depth, let out enough line and troll at slow speed. For salt or fresh water fishing and 6–25 pound test line. A good replacement for outriggers or heavy lead ball sinkers.

Shop Fish Seeker

Docking and Maintenance

FSR Fiberglass Stain Remover

FSR is a unique stain absorbing gel that serves a variety of purposes both ashore and afloat. It's ideal for removing oil, rust, exhaust, waterline and transom stains, yet it can also be used anywhere else fiberglass stains may crop up—shower stalls, furniture, etc. Use for removing road soil from trailered boats and recreational vehicles. Its non-abrasive quality means that it's safe to use on white painted surfaces as well as on gel-coat. Requires no sanding or compounding. Simply apply with a brush, sponge or cloth. Wait a few minutes and then wipe off or rinse. USE ON SHOWERS AND SPAS, TOO.

Shop FSR

Air-Dryr Dehumidifier

Air-Dryr is a silent, inexpensive and effective way to combat moisture, cold drafts and corrosion. Designed to operate anywhere continuously 24 hours a day—just plug it into any 110/120 volt outlet and leave it on. It works best when placed low on the floor of any damp, enclosed space allowing Air-Dryr to draw in cool, moist air. The damp air is gently heated to the point where moisture is held in suspension (above the dew point), then released through the top vents of the device. As warm air rises, more damp air is drawn into the unit, where it too is heated. The resulting natural convection circulates the air and prevents moisture from settling. In a perfect situation, ventilation will remove the moisture laden air, replacing it with drier air

Shop Air-Dryr

Shock Absorbing Solutions

Shockles LineSnubber

Shockles are designed to absorb all shock loads at the dock, at anchor, on a mooring and on land. By absorbing shock loads, Shockles quiet anchor chain noise, and extend the life of dock lines and anchor lines by minimizing wear and chafe. When rigged properly, jarring from tidal surge and wind waves is eliminated increasing both comfort and safety aboard.

LineSnubbers feature our progressive tension design—the more they stretch the more tension it takes to stretch them. This minimizes the return force and dampens shock loads better than traditional rubber snubbers. LineSnubbers attach to the line by using a traditional clove hitch knot, or by using an optional Davis LineGrabber. The Davis LineSnubber is easily adjusted for varying conditions, and it can be readily be moved from line to line, unlike rubber snubbers where the line is woven into the snubber.

Chafe Guards

Davis Removable Chafe Guards fit braided or twisted line from 3/8 to 1" (10–25 mm). They're easy to remove and adjust as lines stretch or chafe protection is needed elsewhere. Great for dock, mooring and anchor lines where wearing through a line could cost you the boat. The outside cover is made of tough, UV-stabilized nylon webbing. The inside is lined with hook-and-loop fasteners to grip the rope.

Shop Chafe Guards

Navigation and Charting

Shop Now


Shop Now


Shop Now